Long-haul fleets that tilt the cab at every service interval ask a great deal of the hydraulic circuit, and tipper and mixer operators who raise the cab on uneven ground ask more still. The Scania Cabin Tilt Hose 2142514 is specified for that kind of duty, where the cab goes up and down far more often than the handbook assumes and the hose spends its working life flexing.
Inside the tilt circuit it carries oil from the pump to the lifting cylinder and returns it to the reservoir when the cab comes down, so it holds pressure in both directions. Flow is modest but constant, and any restriction inside the bore shows up as a cab that rises unevenly or drifts down after the control is released.
Rubber hardens with heat and age, and a hose that has lost its flexibility cracks near the crimp where the flexing is concentrated. Contamination arrives from the reservoir breather or from a failing pump, and grit in the oil scores the bore. A pressure check at the cylinder and a close look at the crimp collars usually settle whether the hose or the pump is at fault.
Each batch is inspected for crimp security, bore cleanliness and thread condition before it is packed, and the 2142514 number is printed on the bag and the carton so a storeman can identify it without opening the box. Distributors should rotate stock on a first-in, first-out basis and keep hoses away from sunlight and ozone sources.

Hot Tags: scania cabin tilt hose 2142514, China scania cabin tilt hose 2142514 manufacturers, suppliers, factory


