By the time a clutch hose problem reaches the workshop, the driver has usually been living with it for a fortnight. The pedal travels further before anything happens, gear changes need a deliberate pause, and occasionally the clutch bites with a jolt. What began as a slight weep at a crimp has become air in the release circuit.
The Scania Clutch Hose 1434229 is a reinforced rubber assembly, not a plain tube. A synthetic core carries the fluid, a braided ply holds it against pressure and repeated flexing, and an outer jacket shields both from heat and grit. It is routed along the firewall and inner wing, clipped at set points, and shaped to clear the pedals, the steering shaft and the exhaust side.
Fitting belongs to one mechanic with a helper at the pedal. The reservoir is drawn down, the unions are cracked open, and the old hose is released from its clips and lifted out. The new one follows the same route, unions are started by hand before being tightened, and the circuit is bled until travel is consistent and no air remains.
Supply is from standing stock referenced 1434229, packed one to a bag with both ends capped and the number on the carton label. Before ordering, a buyer should match the reference to the chassis list, confirm which side the assembly serves, and check that the unions on the vehicle are the type the hose is built for.

Hot Tags: scania clutch hose 1434229, China scania clutch hose 1434229 manufacturers, suppliers, factory, 20466644 Clutch Hose replacement, 981559 Clutch Hose for sale, Clutch Hose 1378439, Clutch Hose 981559


