This pipe belongs to a family of four-cylinder diesel engines fitted across several Ford passenger models and their stablemates, where the EGR circuit sits at the front of the engine and is fed from the exhaust manifold. It also appears on light commercial versions of the same unit, which spend more of their life at low speed and light load, so the pipe runs hot for longer.
Its job is to move exhaust gas from the manifold take-off to the EGR valve without leaking and without shedding heat into the wrong places. On most builds the gas passes through a cooler before it reaches the valve, and the pipe is the section that bridges the two, so it must hold pressure and temperature at once while the cooler does its work.
Soot is the enemy here. Deposits build on the bore, narrowing it and eventually flaking off in hard crusts that jam the valve. A leaking joint shows as black streaking down the pipe and a soot ring around the flange. Diagnosis means looking for that streaking first, then checking for movement at the flex section and for a clean gasket face.
The Ford EGR Tube AV6Q9D477AE is inspected for flange flatness, bore clearance and weld quality, then capped and bagged before cartoning. Distributors should store it flat, keep the cartons dry and rotate stock on the number AV6Q9D477AE so older units move first. Confirm the engine code, and the build date where ranges overlap, before supplying the counter.

Hot Tags: ford egr tube av6q9d477ae, China ford egr tube av6q9d477ae manufacturers, suppliers, factory, 038131521BE, Audi A4 EGR Tube 03L131521AK, EGR Tube 1207017ABA, EGR Tube for RENAULT 7422318432, MAN EGR Tube 511081530047 replacement part, Volkswagen EGR Tube 04L131521BF


