The complaint usually arrives as a whistle or a hiss from the engine bay, followed by a soot-black streak up the firewall and an EGR flow fault on the dash. On TGS and TGX trucks the pipe runs close to the turbo and the exhaust brake, so heat and vibration find any weak weld. By the time the driver books it in, the leak is often visible from outside.
This MAN EGR Tube 51081530050 is built from welded alloy steel tubing, bent to follow the original route between the manifold take-off and the EGR valve. Both ends carry bolted flanges with machined faces. A support bracket ties the run to the block so the pipe does not hang on its joints, and the bore stays clear through every bend to preserve flow.
Fitting is a bench-and-ramp job. Remove the old pipe, clean the flange faces on the manifold and valve, and check that the threads in the mounting holes are sound. Offer the new pipe up dry first to confirm the bends sit clear of hoses and harnesses, then fit a fresh gasket at each end and tighten progressively. Recheck for leaks at idle.
Stock is supplied boxed, with the ends capped and the number 51081530050 on the label. Before ordering, confirm the vehicle model, the engine variant and the shape of the original pipe, because MAN used more than one routing across the TGS and TGX ranges. A photograph of the old unit, flanges included, saves a wrong pick and a second trip to the ramp.

Hot Tags: man egr tube 51081530050, China man egr tube 51081530050 manufacturers, suppliers, factory, 03L131521R EGR Tube, 51081530050, EGR Tube 6011420864, EGR Tube 93168421 original part, EGR Tube for Volvo 32360500, Volkswagen Touareg EGR Tube 03L131521AR


