On an FH or FM tractor unit the recirculation circuit has a long way to travel, and the pipe has to hold that route without adding a joint that will leak. The Volvo EGR Tube 23379048 links the exhaust outlet to the EGR valve and cooler assembly, carrying hot gas at pressure while the cab and chassis move underneath it. Every clamp along that route exists because a single unsupported run would fatigue.
Three failure points repeat on high-mileage trucks. The bellows, where one is fitted, cracks at the crown after years of heat cycling. The flange weld at the manifold end lets go first on engines that idle for long periods. The mounting bracket cracks at its root, and the pipe then vibrates until the seam splits. Any of them shows as a soot trail before it shows as a fault code.
Construction is welded alloy steel tubing with formed bends and machined flanges. The welds run continuous around each joint and are dressed back at the sealing face, so the gasket has flat metal to sit against. Finish is a heat-resistant coating that survives the manifold end without flaking into the intake. Threads and stud holes are chased after coating, not before, so nothing is painted into the threads.
Fitment covers FH and FM trucks across a range of build years, so the chassis number is the safest thing to quote when ordering. Give the number 23379048 as well, because the same engine family used more than one pipe shape. Before fitting, check the cooler mountings and the flexible section downstream; a worn mount will crack a new pipe in the same place within months.

Hot Tags: volvo egr tube 23379048, China volvo egr tube 23379048 manufacturers, suppliers, factory, Audi 2 0 TDI EGR Tube 03L131521AA, Audi A4 EGR Tube 03L131521AK, EGR Tube 93168421 original part, Hyundai 284912A781 EGR Tube, Volkswagen EGR Tube 038131521BL replacement part, Volkswagen EGR Tube 04L131521BF


