Every clamp in an exhaust line does one plain job: it holds two sections together so the gas travels from the manifold to the tailpipe without escaping. The Volvo Exhaust Clamp 20455908 carries that duty at one joint, keeping the pipe ends aligned while heat expansion, engine vibration and chassis movement try to pull them apart. A slack or broken clamp lets the joint open and the whole system hang wrong.
Faults repeat in familiar places. The bolt seizes in its sleeve, so the clamp can no longer be adjusted and is cut off at the next service. The band crushes inward where it was over-tightened, leaving a gap that whistles. The saddle rusts through from the inside, and the joint opens under load with no warning at all, usually on a long climb.
Construction is straightforward but the details decide service life. The strip is rolled rather than pressed, so the band stays round and grips evenly. Edges are deburred and the plating covers the cut faces as well as the flat, which slows the rust that starts at a sharp corner. Bolts run freely and every clamp is checked for thread damage before packing.
Fitment follows the OE number. Read 20455908 from the old clamp, then confirm the joint diameter and the pipe profile by comparing the two parts side by side. Quote 20455908 with the chassis number when ordering, since joint layouts can change between build years, and keep the old clamp until the new one is fitted and checked for leaks at running temperature.

Hot Tags: volvo exhaust clamp 20455908, China volvo exhaust clamp 20455908 manufacturers, suppliers, factory, 2 5x10, 6204900365, 9424902219 Exhaust Pipe replacement, Exhaust Flexible Pipe 3x6, Exhaust Pipe 1428892, Exhaust Pipe 81152100109


