CHEVROLET Oil Cooler Hose 55353327

CHEVROLET Oil Cooler Hose 55353327
Details:
Nothing about this job is difficult, provided the system is cold and the coolant is drained before a single clamp is touched. Undo the bracket bolt, slacken both collars, and work the CHEVROLET Oil Cooler Hose 55353327 off its stubs with a twisting motion rather than a lever. Clean the stubs, fit the new unit, tighten the collars and refill slowly.
Send Inquiry
Description
Send Inquiry
 

Nothing about this job is difficult, provided the system is cold and the coolant is drained before a single clamp is touched. Undo the bracket bolt, slacken both collars, and work the CHEVROLET Oil Cooler Hose 55353327 off its stubs with a twisting motion rather than a lever. Clean the stubs, fit the new unit, tighten the collars and refill slowly.

The cooler exists to hold oil temperature within its working band, and this line is the path coolant takes to reach it. If flow drops, oil runs hot, thins and loses film strength at the bearings, while the extra heat also loads the combustion cycle and pushes exhaust nitrogen oxides upward. Steady flow protects both the lubricant and the emissions result.

The run is shaped around the starter and the block, with a sharp elbow at one end and a long sweep at the other. Wall thickness is held consistent through the elbows so the bore resists collapsing when the pump draws hard. The flanged end and the bead at the opposite tip are formed to the original geometry, giving the collar a square shoulder to bite.

A trustworthy replacement uses a liner that stays flexible in cold weather and does not harden after a season of hot running, and its collar grips without cutting into the wall. A poorer copy often omits the inner braid, so the bore swells and then delaminates, and its flange face is left rough enough to weep. Compare the 55353327 stamp and the bend angles against the original.

168CHEVROLET Oil Cooler Hose 55353327

 

Hot Tags: chevrolet oil cooler hose 55353327, China chevrolet oil cooler hose 55353327 manufacturers, suppliers, factory, oil cooler pipe

Send Inquiry
Send Inquiry