Toyota Turbo Intake Pipe 29601s8010

Toyota Turbo Intake Pipe 29601s8010
Details:
A driver usually reaches the workshop with a whistle that hardens into a shriek under load, then a loss of boost and a puff of black smoke when the pipe finally splits. The engine may still idle cleanly, which is why the fault is so often blamed on the turbocharger until the intake tract is taken apart and inspected. A split on the underside is easy to miss from above, so a simple pressure check often settles the question.
Send Inquiry
Description
Send Inquiry
 

A driver usually reaches the workshop with a whistle that hardens into a shriek under load, then a loss of boost and a puff of black smoke when the pipe finally splits. The engine may still idle cleanly, which is why the fault is so often blamed on the turbocharger until the intake tract is taken apart and inspected. A split on the underside is easy to miss from above, so a simple pressure check often settles the question.

The Toyota Turbo Intake Pipe 29601S8010 is a moulded body with a smooth internal bore, an integral mounting bracket and reinforced collars where the clamps sit. It runs from the air cleaner housing across the top of the engine and dips behind the cylinder head to reach the compressor inlet, so it has to clear the bonnet, the wiring loom and the exhaust side.

Fitting starts with the battery disconnected and the old clamps released, after which the pipe is eased off its unions and any oil residue wiped from the mating faces. The replacement goes on dry, without sealant, the clamps are set lightly, the body is aligned by hand and only then are the fasteners brought to their final tightness.

Supplied against 29601S8010, the pipe should be ordered by the number moulded on the original rather than by model year alone, because running changes are common. Units are capped, bagged and boxed with the number and quantity on the label, and older cartons should leave the rack first. Quantities are quoted per carton, and mixed orders can be combined on one pallet where the sizes allow.

082Toyota Turbo Intake Pipe 29601s8010

 

Hot Tags: toyota turbo intake pipe 29601s8010, China toyota turbo intake pipe 29601s8010 manufacturers, suppliers, factory, 06D103213G, 06D103213G Intake Hose replacement, 1118045A90D Turbo Intake Pipe, 29601s8010 Turbo Intake Pipe, Hyundai Elantra Turbo Intake Pipe 29601s8010

Send Inquiry
Send Inquiry