Blue smoke from the tailpipe after a long climb, and a faint oil smell at the bonnet, are the usual complaints that bring a Ranger into the workshop. On inspection the return line is often found wet at the joint above the bell housing, with a tell-tale streak running down the casting. Left alone, the leak starves the bearing and the turbo starts to howl.
Fabricated from steel tube rather than hose, the Ford Turbo Oil Pipe FB3Q6K677AA runs from the turbocharger drain port down the side of the block to the sump return. The tube is shaped to clear the engine mount and the exhaust downpipe, and its bends are gentle enough to let oil drain freely when the engine is switched off. Bolted flanges sit at each end.
Fitting is straightforward once the air intake duct is moved aside. The old pipe is unbolted, the mating faces are cleaned of old gasket residue, and the new unit is offered up dry before the fasteners are run down by hand. Tightening is done evenly, in stages, so the flange does not distort. Refilling with the specified oil and checking for weeps after a road test complete the job.
Stock is held against the FB3Q6K677AA reference and shipped in individual sleeves so the flange faces stay flat in the carton. Buyers should confirm the engine code and the pipe orientation on their vehicle before ordering, because visually similar variants exist across the range. Mixed consignments can be palletised and labelled to the customer's own part numbers, and small trial lots are accepted.

Hot Tags: ford turbo oil pipe fb3q6k677aa, China ford turbo oil pipe fb3q6k677aa manufacturers, suppliers, factory, 994898565, Cummins Truck Turbo Oil Pipe 3287818, Mitsubishi Turbo Oil Return Pipe ME013684, Peugeot Turbo Oil Pipe 9832926080, Turbo Oil Pipe 038145736C original part, Turbo Oil Pipe 1540730090 original part


