Passat, A4 and Golf models with the turbocharged four-cylinder petrol engine share this drain arrangement, and the pipe is a familiar sight on ramps in independent workshops. The turbo sits close to the bulkhead, so the drain has very little room to fall, and the line is shaped around the compressor housing rather than taking a direct route to the sump.
The Volkswagen Turbo Oil Pipe 038145736C returns oil from the turbocharger bearing housing to the sump. Because the drain works on gravity, the pipe is routed with a continuous fall and a generous bore; the flange at the turbo end is machined to sit flat against the housing. A heat-resistant outer finish limits scaling where the line passes close to the downpipe.
The usual failure is a cracked section near the bend or a flange rusted thin, and both begin with heat cycling. Seepage leaves a crust around the joint and a smell of burning oil after a hard drive. Cleaning the area and rechecking after a road test separates a drain leak from a cam cover leak, and a blocked breather should be ruled out before the pipe is condemned.
Every pipe is checked for cracks at the bend, flange flatness and thread condition before it is sleeved and boxed. Distributors should rotate this line actively, because 038145736C moves quickly and old stock sits long enough for surface rust to start. Confirm the engine code and turbocharger type before ordering, since the same body shape can carry a different drain.

Hot Tags: volkswagen turbo oil pipe 038145736c, China volkswagen turbo oil pipe 038145736c manufacturers, suppliers, factory


