Draining a reservoir takes two minutes and saves a compressor. Park on level ground, chock the wheels, and bleed the tank until the gauge reads zero. Unscrew the drain valve, let the water run into a tray, and inspect what comes out for rust or oil. Fit the replacement, refill, and confirm the valve holds with the system at working pressure.
Water left in a reservoir finds its way into every valve downstream. It freezes in winter, corrodes bores in summer, and carries emulsified oil into seals that were never designed for it. A drain that seals properly keeps the air circuit dry, and a dry circuit means fewer frozen valves, steadier brake release and less load on the compressor. That is the whole argument for replacing a weeping drain rather than wiping it.
The Air Tank Drain Valve Brass M22x1.5 is a short brass body with a hex for a spanner and a threaded M22x1.5 entry into the tank boss. Wall thickness is generous at the thread, where a thin section would distort under tightening, and the outlet is a plain bore sized to drop water quickly. The seat is machined, not pressed.
A cheap drain valve usually gives itself away at the thread and the seat. The brass may be thin enough to deform at normal tightening, and the seat is often stamped rather than cut, so it never seals properly against the plug. Look for a clean thread start, an even seat and a body that rings solid. Specify M22x1.5 by the marking to avoid a near-fit thread.

Hot Tags: air tank drain valve brass m22x1.5, China air tank drain valve brass m22x1.5 manufacturers, suppliers, factory, 4mm Air Hose Fitting replacement, 6 6mm, Explosion Proof Air Hose Fitting Reducing 6 8mm, M22x1 5 6 M22x1 5 8 Air Hose Fitting, Truck Air Hose Quick Connector replacement


