Audi 3.0 TDI EGR Cooler Pipe 059131525CP

Audi 3.0 TDI EGR Cooler Pipe 059131525CP
Details:
In a modern turbocharged diesel, exhaust gas recirculation is the primary lever for lowering peak combustion temperatures and therefore cutting the raw NOx that forms inside the cylinders. Routing untreated exhaust straight back into the intake would overheat the charge and erase the benefit, so the gas is first pushed through a liquid-cooled heat exchanger before it is fed to the manifold. This component sits on the cool side of that loop, carrying the already chilled gas between the EGR cooler outlet and the intake tract.
Send Inquiry
Description
Send Inquiry
 

In a modern turbocharged diesel, exhaust gas recirculation is the primary lever for lowering peak combustion temperatures and therefore cutting the raw NOx that forms inside the cylinders. Routing untreated exhaust straight back into the intake would overheat the charge and erase the benefit, so the gas is first pushed through a liquid-cooled heat exchanger before it is fed to the manifold. This component sits on the cool side of that loop, carrying the already chilled gas between the EGR cooler outlet and the intake tract.

The Audi 3.0 TDI EGR Cooler Pipe 059131525CP is engineered as a direct OE-replacement line for the 059131525 part series. Its flange positions, bore diameter and bolt pattern mirror the original casting, so it bolts on without bracketry changes or adapter plates. Because it is built to the 059131525 specification rather than to a generic catalog guess, the sealing faces align squarely against the cooler housing and the inlet elbow.

On a 3.0 TDI V6, the charge-air path runs tight against the engine block, so the line must survive repeated heat soak from the turbocharger and adjacent exhaust manifold while staying free of cracks at the weld toes. We use a heat-resistant aluminum alloy casting for the flanges and a stainless tubular section where flexibility absorbs engine shake, joined by brazed joints that hold up against condensation, soot acids and road splash.

A failed original tube often shows up as a rough idle, elevated smoke, or a stored fault pointing to implausible EGR flow, because even a tiny internal or external leak skews the measured gas mass. Swapping in the Audi 3.0 TDI EGR Cooler Pipe 059131525CP restores the metered recirculation rate the ECU expects, letting closed-loop EGR duty return to its calibrated window.

The part ships as the complete ready-to-fit line, cleaned and pressure-tested, and is offered with a standard replacement warranty for repair shops and parts distributors. As an OE-number-matching replacement for applications using 059131525CP, it is intended for any vehicle that originally carried that exact reference.

Audi 30 TDI EGR Cooler Pipe 059131525CP
 

Hot Tags: audi 3.0 tdi egr cooler pipe 059131525cp, China audi 3.0 tdi egr cooler pipe 059131525cp manufacturers, suppliers, factory, AUDI Audi A4 EGR Cooler Pipe 059131525P, Audi EGR Tube 038131521CB, EGR Tube 284914A710 original part, EGR Tube A6511411004, Volkswagen EGR Cooler Pipe 059131525AB replacement part, Volkswagen Touareg EGR Tube 03L131521AR

Send Inquiry
Send Inquiry