A typical complaint from a driver of one of these vehicles is a loss of pull on gradients, a puff of black smoke when setting off and an engine light that returns a day after being cleared. On inspection the pipe is usually found restricted, or leaking at the lower joint with soot packed into the bend and a gasket that has been blowing for some time.
The Isuzu EGR Tube 1207017ABA is formed from welded steel tube, bent to run from the exhaust side of the engine to the EGR valve mounted nearby. It has flanged ends for bolted joints and a short flex element to allow for movement. The bore is sized to pass the required flow without becoming a trap for deposits, and the flanges are of even thickness.
In the workshop the pipe is reached after removing the engine cover and, on some layouts, the dipstick tube bracket. The mounting faces are scraped and wiped, new gaskets are fitted dry, and the bolts are brought up evenly from the centre outwards so the flanges pull down flat. Old gaskets are never reused, and the joint is checked at idle before covers go back on.
Orders are supplied boxed, with each pipe protected at the flanges and 1207017ABA on the label. Before ordering, a buyer should confirm the engine variant and check whether the vehicle uses a cooler-mounted or valve-mounted pipe, since the two look alike on the shelf. Keep stock indoors and rotate so older boxes ship first, comparing the old pipe side by side.

Hot Tags: isuzu egr tube 1207017aba, China isuzu egr tube 1207017aba manufacturers, suppliers, factory, 059131525DN EGR Cooler Pipe replacement, 147252403R EGR Tube, 6421401108 EGR Tube replacement, Audi EGR Tube 038131521CB, Audi Touareg EGR Cooler Pipe 059131525CP, EGR Tube for RENAULT 7422318432


