A split in the exhaust-side pipe rarely stays small. Soot fans out across the manifold, the engine bay smells hot at idle and the EGR valve can no longer hold its commanded flow. Continued running washes grit towards the intake and can leave the valve stuck open, so what would have been a straightforward swap becomes a valve replacement as well.
In normal service the pipe carries exhaust from the manifold branch to the EGR valve, and on this application it also forms part of the exhaust-side run. Gas passes through it hot and under pressure whenever the valve is open. The MAN EGR Tube 51.08153.0047 is shaped to that route, with bolted flanges at each end and a bracket to steady the length.
Manufacture starts with alloy steel tube, cut and bent on mandrel tooling so the walls do not flatten at the curves. Flanges are welded in position and the gasket faces machined flat, then the assembly is cleaned and checked for bore obstructions. Reference 51081530047 is applied for identification, and the finish is chosen to resist heat and road spray.
Before shipment each unit is leak-checked, its flanges checked for flatness and its ports aligned against the drawing. Ends are capped, the pipe is sleeved and boxed, and the label repeats 51081530047. A buyer should confirm the original number and the flange pattern before ordering, since visually similar MAN pipes differ in bend angle and bracket placement.

Hot Tags: man egr tube 51.08153.0047, China man egr tube 51.08153.0047 manufacturers, suppliers, factory, 059131525DN EGR Cooler Pipe replacement, 51081530050, Audi A4 EGR Tube 03L131521AK, EGR Tube 6011420864, RENAULT 147252403R EGR Tube, Volkswagen Touareg EGR Tube 03L131521AR


