Every original pipe carries its part number laser-marked or stamped on a flat pad near one of the end fittings, and on the OM651 that marking is the only reliable way to confirm what you are replacing. Read it cleanly before the pipe goes in the bin, compare it with the number on the Mercedes-Benz Turbo Oil Pipe A6511800222 listing, and check the banjo or flange pattern at both ends against the new item.
Failures on this pipe cluster around the feed end, where the fitting is clamped to the cylinder head and takes the full heat of the exhaust side. The second point is the bracket collar, which cracks as the engine rocks under load. The third is the crimped joint itself, which loosens after repeated removal and refitting until it seeps.
Tube runs are produced on a CNC bender, which keeps the centre line consistent from one batch to the next and prevents the flattening that hand-bent sections show on tight radii. The sealing faces at the turbo and filter housing ends are machined flat and checked for square, because a face that is off by even a little will not hold against a crush washer.
Work from the turbo end first, offering the pipe up without forcing it, then bring the cylinder head fitting into contact and start the fastening by hand. Inspect the old crush washers, the threaded port and the mounting clip before refitting. Order against A6511800222 and confirm the OM651 engine code, since the same pipe number is not used across every tune of that engine.

Hot Tags: mercedes-benz om651 turbo oil pipe a6511800222, China mercedes-benz om651 turbo oil pipe a6511800222 manufacturers, suppliers, factory, 1225A018, 5135786AB genuine part, Hino Turbo Oil Return Pipe 29601E0870 replacement part, Hino Turbo Oil Return Pipe s2410 61190, Turbo Oil Pipe for Ford AG9G6K677BC, Turbo Pipe 154070E020


