On an OM457-powered Actros or Arocs, access comes from below once the wheels are chocked and the air system is bled down. Remove the lower heat shield, loosen the union at the turbo drain, and support the pipe before the flange bolts come out. Lower it squarely so the sealing ring does not drop out of reach, then cap the turbo port with a clean plug.
Lubrication depends on the drain as much as on the feed. Oil leaving the bearing housing is foamed and must fall away quickly; if the Mercedes-Benz Turbo Oil Pipe 4571801622 is restricted, the housing fills, pressure rises behind the piston rings and the engine starts consuming oil. That shows as smoke under load, fouled sensors and extra soot for the filter to handle.
Each bend is formed to clear the exhaust manifold and the engine mount without touching either, and the straight run into the sump is kept long enough to shed oil cleanly. Wall section remains constant around the bend radius, so hot oil cannot pool in a thinned throat. Flange faces are machined square to the tube axis, with bolt holes spaced to the original pattern.
A cheap copy often looks right on the bench and fails within a season: thinner tube, a weld that stops short of the flange, or a sealing face left as-cast. The dependable alternative to 4571801622 is pressure tested, checked for bore alignment and supplied with a flat, machined face. Ask for the test record, and inspect the weld toe yourself before the pipe goes on.

Hot Tags: mercedes-benz turbo oil pipe 4571801622, China mercedes-benz turbo oil pipe 4571801622 manufacturers, suppliers, factory, 5411800922 Turbo Pipe replacement, 994898565, Hino Turbo Oil Return Pipe 29601E0870 replacement part, Hino Turbo Oil Return Pipe s2410 61190, Turbo Oil Pipe 1540730090 original part, Turbo Oil Return Pipe 0073500435


