Mitsubishi Turbo Oil Pipe 1225A018

Mitsubishi Turbo Oil Pipe 1225A018
Details:
Work from the top of the engine bay, because the upper flange is reachable once the intercooler cover and the intake duct are moved aside. Crack the union at the turbocharger, support the pipe, and release the lower flange last so the tube does not swing on its bracket. Withdraw the Mitsubishi Turbo Oil Pipe 1225A018 carefully, keep the old gaskets for comparison, and wipe both mating surfaces before the new unit goes in.
Send Inquiry
Description
Send Inquiry
 

Work from the top of the engine bay, because the upper flange is reachable once the intercooler cover and the intake duct are moved aside. Crack the union at the turbocharger, support the pipe, and release the lower flange last so the tube does not swing on its bracket. Withdraw the Mitsubishi Turbo Oil Pipe 1225A018 carefully, keep the old gaskets for comparison, and wipe both mating surfaces before the new unit goes in.

Oil flow to the turbocharger bearing depends on an unrestricted path, and a pipe that is dented, kinked or choked with carbon will not deliver it. Starved of oil, the bearing overheats and the shaft seal fails, so oil reaches the exhaust stream and burns as blue smoke. Keeping the 1225A018 pipe clean and leak-free therefore belongs to emissions work as much as to turbo protection.

The tube carries two or three bends depending on the variant, each formed over a mandrel so the wall thins evenly and the bore stays circular. Wall thickness is chosen to suit the heat and vibration of the installation. Flange faces are machined flat and square to the tube axis, with bolt holes on the original pitch circle, so a gasket seats evenly and the joint stays dry.

Budget copies tend to fail on the details: a flange face that is slightly convex, holes punched rather than drilled, or a bracket tacked at one point. A sound replacement has flat machined faces, a continuous bracket weld, an even coating inside and out, and bend geometry close enough to the original to fit without strain. Those differences show up after the first long run, not on the bench.

149Mitsubishi Turbo Oil Pipe 1225A018001

 

Hot Tags: mitsubishi turbo oil pipe 1225a018, China mitsubishi turbo oil pipe 1225a018 manufacturers, suppliers, factory, Cummins Truck Turbo Oil Pipe 3287818, Fiat Turbo Oil Return Pipe 0073500435 replacement, Hyundai Turbo Oil Return Pipe 282402A780, Peugeot Turbo Oil Pipe 9832926080, Turbo Oil Pipe for Ford AG9G6K677BC, Turbo Oil Return Pipe for NISSAN SLR11706

Send Inquiry
Send Inquiry