Start with the number. Pull the failed pipe off the turbo, clean the grime from the bracket and read the stamping on the tube itself, not the label on the old box. Those characters, 15407-30070, sit close to the mounting tab and must match the Toyota HiAce Turbo Oil Feed Pipe 15407-30070 listing before you order. Check the bend sequence as well, since a right number on a wrong shape still fouls the manifold.
These pipes fail in three familiar ways. The flare or banjo eye cracks where it is clamped to the turbo inlet after years of heat cycling. The tube work-hardens and splits at the first bend behind the exhaust housing. Or the bore cokes up with burnt oil and starves the bearing while the gauge still reads normal. Restricted feed usually announces itself as blue smoke and a turbo that whines on spool-up.
Construction is welded steel tubing, mandrel bent to follow the original route, with a banjo eye or flanged end at each termination. Both sealing faces are cut flat so the copper washer or gasket beds down evenly instead of pinching on one side. The bracket is welded, not clipped, which keeps the tube from vibrating against the block. Oil on the threads helps the fittings seat without galling.
Offer the pipe up dry first and check that both ends meet their ports without force. Fit the turbo end loosely, route the tube clear of the manifold and exhaust housing, then nip up the fasteners once everything is aligned. Inspect the old clips and heat shielding before refitting and renew any perished insulators. Prime the turbo with clean oil, start the engine and check both joints for weeping.

Hot Tags: toyota hiace turbo oil feed pipe 15407-30070, China toyota hiace turbo oil feed pipe 15407-30070 manufacturers, suppliers, factory, 1225A018, 68005450AA Turbo Oil Return Pipe, 994898565, Ford Turbo Oil Pipe AG9G6K677BC replacement part, Toyota Camry Turbo Oil Return Pipe 1540767010, Turbo Oil Pipe 038145736C original part


