A small exhaust pipe has quite a lot of knowledge. The main function of the exhaust pipe is to exhaust air and silence the sound. The entire exhaust system consists of: exhaust manifold, three-way catalytic converter, middle section muffler, tail section muffler and the pipes connecting them. The exhaust manifold is installed on the cylinder head, and the other end is connected to the front exhaust pipe, and then the middle section and the rear section are connected in sequence. Except for the two ends of the exhaust manifold, which are fixed with bolts, the entire other pipeline is suspended under the car body with rubber lifting lugs. It can be swayed up and down and left and right when the road is bumpy, so that the vibration generated by the exhaust will not be transmitted to the cabin.
Everyone knows the silencing effect of the exhaust pipe. Because gasoline burns violently in the cylinder, the sound is still very loud. With the exhaust pipe muffler, the sound becomes so small. Without the muffler, it is really deafening. When the gas is accelerating, it is louder than the sound of a farm tractor. Even if a small hole is broken in the muffler, the exhaust sound will be relatively loud.
In addition to silencing the exhaust pipe, it also has an impact on the car's power. In theory, we believe that the faster the exhaust gas is discharged, the better, but in reality this is not the case. Exhaust gas that is too fast or too slow will have an impact on the car. This involves a concept called exhaust back pressure, which can also be called back pressure. Exhaust back pressure refers to the exhaust resistance. The exhaust pipe is very long and has a certain bend. When exhausting, it will definitely produce resistance to the exhaust gas. The amount of resistance is expressed by exhaust back pressure. The greater the back pressure, the greater the exhaust resistance, and the harder it is for exhaust gas to be discharged; the smaller the back pressure, the smaller the exhaust resistance, and the smoother the exhaust.
Excessive back pressure will definitely affect the engine power, because the exhaust gas cannot be effectively discharged, and the pressure in the exhaust pipe is very high. If the exhaust gas in the cylinder wants to enter the exhaust pipe, the piston is required to push outward with greater force. This will cause greater resistance during the exhaust stroke, which will cause additional loss of engine power. Just like when we push an object, if the resistance of the object is small, we can push it away with a gentle push; if the resistance is large, we have to push harder, which takes more effort. The engine will consume additional energy. In extreme cases, if the exhaust pipe is completely blocked, the engine will not be able to continue running because the exhaust gas cannot be discharged.
If the back pressure is too small, it will also affect the engine power, but it will affect the power at low speeds. Let's focus on explaining it. Because the exhaust occurs at a certain time interval and is not continuous, it will only be exhausted when the piston of a cylinder runs the exhaust stroke. When the engine speed is low, the exhaust time interval of each cylinder will be long. With this time interval, each exhaust gas has enough time to be discharged from the exhaust pipe to the outside of the car without lingering here in the exhaust manifold. In this way, the gas pressure at the exhaust manifold is much lower than the gas pressure in the cylinder, which will generate a suction force to suck the exhaust gas out of the cylinder, speeding up the exhaust gas coming out. If only the exhaust gas comes out, it has no effect. However, when the exhaust valve is about to close but has not yet closed, the intake valve has begun to open at this time, and there is an intake advance angle, so there will be a coincidence time when the exhaust valve is not closed and the intake valve is open. Because the exhaust speed is fast, a little mixed gas that has just entered will be sucked out by strong suction and discharged from the exhaust valve. Because the mixture is lost a little, the car's power will decrease.
When the engine is running at high speed, because the amount of exhaust gas increases greatly, the interval between adjacent exhaust gases also becomes shorter, and all the exhaust gas will not be discharged smoothly. There will be exhaust gas retention at the exhaust manifold, forming a certain pressure. In this way, the pressure difference with the cylinder will not be too large, and a large suction force will not be generated to suck in the exhaust gas in the cylinder, and the mixed gas will naturally not be sucked out. Therefore, small back pressure is more suitable for medium and high speed operation of the engine.
The structure of the exhaust pipe will directly affect the amount of exhaust back pressure, such as the size of the curvature, the smoothness of the inner wall, the thickness of the exhaust pipe, the structure of the muffler, etc. The car has made a good balance in the design, so it is most economical to use the original exhaust pipe for family cars. Nowadays, there are more and more exhaust modifications. Generally, simple modifications to the exhaust are to reduce the back pressure and make the exhaust sound louder. Use a smoother exhaust pipe, change the tail section muffler, reduce the bend of the exhaust pipe, make it thicker, etc. Anyway, we are trying to find ways to make the exhaust smoother. In this way, the power will be improved at medium and high engine speeds, but at low speeds, the power will be slightly reduced. However, the exhaust sound can indeed be changed to be very pleasant, which is what many people value more.

