Introduction To Exhaust Pipes

Aug 01, 2026

Leave a message

The exhaust pipe is part of the engine exhaust system. The exhaust system mainly includes an exhaust manifold, an exhaust pipe and a muffler. Generally, a three-way catalytic converter that controls engine pollutant emissions is also installed in the exhaust system. The exhaust pipe generally includes a front exhaust pipe and a rear exhaust pipe.


Back pressure exhaust pipe
(Same as the original factory and more environmentally friendly) The principle is the same as the original factory, but the sound will be better than the original factory. Most original factory cars use this kind of pipe. It mainly relies on the grating muffler in the pipe or the volume change of the pipe to generate a pressure that will return to the cylinder. When the engine is ignited, the piston begins to follow the power stroke, and the exhaust valve will open before the piston reaches the bottom dead center. At this time, the back pressure in the tube will block the exhaust gas from rushing out, allowing the mixture to achieve complete combustion. However, if the back pressure is too strong, the exhaust gas cannot be completely discharged from the cylinder, causing the exhaust gas and the mixture to burn together, reducing the combustion efficiency. Of course, the most direct impact is the horsepower output. Its advantages: low noise and good low-speed torque.

 

Half back pressure pipe
Of course, the back pressure force of this kind of pipe is lower, and the exhaust compliance is better than the back pressure pipe. Simply put, it is between the back pressure pipe and the straight-through pipe. It has a moderate back pressure to obtain starting torque. The exhaust compliance is better than the back pressure pipe. Of course, the torque at medium and high speeds is also greater than that of the back pressure pipe. Advantages: Good torque performance at mid-range and tail speeds

 

straight pipe
The acceleration performance will be better than the back pressure pipe, but the biggest disadvantage is that it is very noisy, so noisy that the "police uncle" will chase you. The back pressure is extremely low, the exhaust has no resistance, the low speed torque is poor, and the medium and high speed torque is large. Advantages: Smooth exhaust, strong torque at high speeds

 

semi-straight pipe
In fact, the semi-straight-through pipe is the same as the semi-back pressure pipe, except that the exhaust diameter is larger than that of the semi-back pressure pipe. Advantages: The starting torque is lower than that of the semi-back pressure pipe, but the torque at medium and high speeds is large.

 

variable exhaust pipe
Valve controlled exhaust for optimal sound and performance.

Send Inquiry
Send Inquiry