Oil leaves the turbocharger far hotter than it arrived, and it has to fall away from the bearing under its own weight rather than being pumped. The pipe that carries it back is therefore a drain, not a pressure line, and any restriction in it quickly shows at the seals. The Land Rover Turbo Oil Pipe 9X2Q6K673GB is shaped to keep that fall continuous along the whole route.
Cracking tends to start in three familiar spots. The first is the weld where the pipe meets the turbo flange, worked by expansion each time the engine heats and cools. The second is the bracket weld on the mid-section, which fails when the mounting bush has perished and the pipe is left to swing. The third is the lower union, where grime traps moisture against the tube.
Production starts with tube cut to length and formed over a mandrel, which supports the wall from inside as the bends are pulled. That matters on a drain, because a collapsed bend becomes a trap. Ends are turned and welded, the flange faces are machined, and the assembly is coated inside and out before the heat shield clips are fitted. Each batch is checked against a sample.
Fitment covers the 3.0 TDV6 applications in the Range Rover, and the number 9X2Q6K673GB should be read off the original pipe and matched before anything is ordered. Look at the turbo flange for a worn sealing land, check that the heat shield clip positions match, and confirm the bracket does not foul the manifold before final tightening.

Hot Tags: land rover turbo oil pipe 9x2q6k673gb, China land rover turbo oil pipe 9x2q6k673gb manufacturers, suppliers, factory, 1225A018, 5411800922 Turbo Pipe replacement, 994898565, Fiat Turbo Oil Return Pipe 0073500435 replacement, NISSAN 151927553R Turbo Oil Pipe, Peugeot Turbo Oil Pipe 9832926080


